NCC certification
NCC is the abbreviation of The National Communications Commission, which mainly controls the communication and information equipment circulating and used in the Taiwan market: 1. LPE: Low Power Equipment is low power equipment (for example: Bluetooth , WIFI equipment); 2. TTE: Telecommunications Terminal Equipment, that is, communication terminal equipment (such as mobile phones, tablet equipment).

NCC certification range
Low-power RF motors with operating frequencies from 9kHz to 300GHz, such as: wireless network (WLAN) products (including IEEE 802.11a/b/g), UNII, Bluetooth Products, RFID, ZigBee, wireless keyboard, wireless mouse, wireless headset microphone, radio walkie-talkie, radio remote control toys, all kinds of radio remote control, all kinds of wireless anti-theft devices, etc. 2. Public switched telephone network equipment (PSTN) products, such as wired telephones (including VOIP network telephones), automatic alarm equipment, telephone recorders, fax machines, remote control devices, wired telephone wireless main and auxiliary machines, key telephone systems, data equipment ( Including ADSL equipment), incoming call display terminal equipment, 2.4GHz radio frequency telecommunication terminal equipment, etc. 3. Land mobile communication network equipment (PLMN) products, such as wireless broadband access mobile station equipment (WiMAX mobile terminal equipment), GSM 900/DCS 1800 mobile phones and terminal equipment (2G mobile phones), third-generation mobile communication terminals equipment (3G mobile phone), etc.

If wireless products want to be sold in Taiwan, they must apply for NCC certification. The Wi-Fi module, also known as the serial port Wi-Fi module, belongs to the Internet of Things transmission layer. Its function is to convert the serial port or TTL level into an embedded module that conforms to the Wi-Fi wireless network communication standard. The built-in wireless network protocol IEEE802.11b.g.n Protocol stack and TCP/IP protocol stack. Traditional hardware devices embedded in Wi-Fi modules can directly use Wi-Fi to connect to the Internet, which is an important part of realizing wireless smart home, M2M and other Internet of Things applications.

NCC certification mark proportion description

       1. It should be labelled or stamped on the position of the equipment body in an appropriate proportion. There is no maximum/minimum size regulation, and the principle of clarity is the principle.      

       2. This NCC mark, together with the inspection number, shall be attached to the product in accordance with the regulations.      

Example of making a qualified label

       In order to meet the needs of Taiwan's trade facilitation and customs clearance, from January 1, 1995, the telecommunication control radio frequency equipment and telecommunication terminal equipment have been revised as follows: From 1994 For low-power radio frequency motors and wireless telecommunication terminal equipment that have obtained the certification number before December 31, it is necessary to convert the certification number to the new coding method (customs clearance code) in 1995.
 

NCC certification process

       1. The entrusting party provides product information to the institution to evaluate the quotation;      
         ; 3. Arrange product forecast and review data;      
       4. If test, data exists If there is a problem, arrange for rectification and re-test until it is qualified; Test;     
       6. After the witness test is completed, the issuing agency will issue a test report and issue a certificate;      
          
 

Application for Taiwan NCC certification preparation materials

       1. Product circuit schematic;      
       2. Product block diagram;    
       3. Product Specifications;    
           
       5. BOM;      
        6. Service Request Form;      
       7. Factory ISO9001 Certificate;
        8. Antenna Specifications.
 

NCC certification application cycle

        The NCC certification application cycle is 3-4 weeks, and the cost can be determined according to the product information.  

NCC factory inspection and certificate validity period

       NCC certification has no factory inspection, and the certificate has no validity period. As long as the product is not changed and the test standard is not updated, the certificate is always valid.

Comparative analysis of Taiwan NCC certification and BSMI certification